![]() ![]() Power meters and sources are great for testing the entire channel to verify power and loss, but are inefficient for troubleshooting because the user must sequentially test a channel link-by-link, which can take several hours depending on the length of the channel and the number of links. Not only is this process time-intensive, it is also unrealistic in many data center and campus environments in which the links run underneath floor tiles, behind walls, or underground. They also require that the user maintain visual contact with the cabling while tracing its length to locate any faults. ![]() Visual fault locators, lasers, or flashlights, while easy to use, have extremely limited troubleshooting capabilities because they are unable to distinguish or locate problematic loss or reflective incidents. Tools normally used for troubleshooting are typically inefficient, ineffective, or both. View our range of Fluke Networks Fiber QuickMap Accessories available at Comms Express, Networking Reseller - Free Delivery Available Buy Online Today. Averaging six seconds of test time, it quickly provides the visibility and data necessary to locate and fix any issues with your multimode fiber cabling. Fiber Quickmap, Multimode Fiber Distance and Fault Locator. PA-ST Screw on ST adapter (not for older meters with rectangular style connector)įluke Networks also offers the following 100 meter multimode launch fibers with other connector types.The Fiber QuickMap troubleshooter, as a single-ended instrument, cuts down your troubleshooting time from hours to mere seconds. PA-FC Screw on FC adapter (not for older meters with rectangular style connector) PA-LC Screw on LC adapter (not for older meters with rectangular style connector) PA-SC Screw on SC adapter (not for older meters with rectangular style connector) ![]() It is possible to modify the output port on the device to another connector type by ordering one of the following adapters: The Fiber QuickMap ships with an SC output port. Includes multimode fiber fault locator unit, screw on interchangeable SC adapter. MMC-62-SCFC Multimode launch cable 62.5 µm SC/FC Fiber Quickmap W/ Pwr Meter Set Mmf Faul FQM-SFP-M PC-Canada. MMC-62-SCST Multimode launch cable 62.5 µm SC/ST Fiber OneShot PRO and Fiber QuickMap measure length. MMC-62-SCLC-M Multimode launch cable 62.5 µm SC/LC Fluke Networks FQM-100-M Fiber QuickMap mainframe with SC/LC 50 m Launch Fiber and carrying pouch. MMC-62-SCSC Multimode launch cable 62.5 µm SC/SC MMC-50-SCE2K Multimode launch cable 50 µm SC/E2K MMC-50-SCFC Multimode launch cable 50 µm SC/FC ![]() MMC-50-SCST Multimode launch cable 50 µm SC/ST It provides more information than a simple Visual. MMC-50-SCLC-M Multimode launch cable 50 µm SC/LC Fiber Quick Map works on multimode optical fiber to find high loss connections and the end of the fiber. MMC-50-SCSC Multimode launch cable 50 µm SC/SC And no fiber patch cords should be used to transition different connector types.įluke Networks offers the following (100 meter) OTDR launch fibers with for use with the SC connector type: In other words, if the link is 62.5 micron multimode, do not use a 50 micron multimode launch fiber. Make sure that the OTDR launch fiber used is of the same core diameter and connector type as the fiber link under test. Using a shorter fiber launch cable may hide the first event within the Fiber QuickMap’s dead zone.Īttenuation and event deadzones explained Like an OTDR, a laser sends light pulses through. Multimode (Fiber QuickMap) fiber optic cable. In order to get the best results with the Fiber QuickMap, especially visibility into the first event, we recommend the use of a high quality, low loss, and low reflectance fiber launch cable of at least 100 meters with the appropriate connector for the first connection into the link under test. identify high loss events on single mode (Fiber OneShot PRO) and. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |